Separate modulation for your lows, mids and highs.
Put rhythmic movement in one part of the mix and let the rest hold still. Runs on Mac and Windows, with a free demo to try first.
$20. Free updates for life.

Tertiary splits the audio into three bands, low, mid and high, and gives each band its own LFO. That lets you put rhythmic movement in one part of the spectrum while the other parts stay untouched.
When pads, sustained synth chords or a guitar part start to feel rhythmically flat, modulate the mids or the top end and leave the root notes alone. Or the other way round: make the rhythm out of the root notes and keep the melodic part steady.
Full-band tremolo on a vocal gets in the way of the words, which is why it is rarely used there. With the bands split, the clarity range stays steady while gentle movement happens higher up.
Put it on a reverb return. Instead of a static wash, the upper part of the tail moves in time while the low end stays smooth underneath.
Invert the polarity of the mid band against the low and high bands and the result sounds closer to phasing than to tremolo. Different shapes, rates and phase offsets on each band give textures one LFO can’t.
This is the plugin itself, built to run in the page. Load one of the tracks or your own audio and use every control. No account, nothing to install.
It works best on a computer. On a phone, come back on your desktop, or download the demo below.
Like how it sounds?
Each band has the same set of controls, and each one runs on its own.

Ramp Up, Ramp Down, Triangle, Square, Sine, Hills and Valleys. INV flips any shape 180 degrees.
How far each band’s level moves, from a slight sway to full chop.
Sync to the DAW tempo, half notes to sixteenth notes, or run at a free rate from 0.5 to 12.5 Hz.
Each band’s level after the modulation, -24 to +24 dB. It doubles as a basic three-band EQ.
A continuous crossover with both split points anywhere from 20 Hz to 20 kHz. Solo, bypass or mute any band.
Moves the midpoint of the LFO cycle away from 50%, so one half of the wave is shorter than the other. It gets close to the uneven swing of old bulb-driven tremolo circuits.
Offset each band’s LFO from -180 to +180 degrees, so the bands move against each other instead of together.
An oscilloscope draws all three LFOs as they run. The crossover view shows the frequency response, with a real-time FFT you can turn on or off.
For the current version.
Version
1.1.1, released 3 November 2026
Mac
Apple Silicon and Intel Macs, macOS 11 (Big Sur) or newer. VST3, AU and standalone.
Windows
Windows 10 or newer, 64-bit. VST3 and standalone.
Tested in
Logic Pro (Mac), Cubase (Windows), REAPER (Mac and Windows). Passes pluginval (Mac and Windows) and auval (Mac).
Bands
Three, with a continuous crossover from 20 Hz to 20 kHz
LFO shapes
Ramp Up, Ramp Down, Triangle, Square, Sine, Hills, Valleys
Per band
Shape, INV, Skew, Depth, Rhythm, Phase, Gain, Bypass, Solo, Mute
Band gain
-24 dB to +24 dB
Rhythm
DAW sync from 1/2 to 1/16 notes, or free from 0.5 Hz to 12.5 Hz
Presets
14 factory presets, plus your own, shared by the VST3, AU and standalone app
Licence
One person, on all of their own computers, Mac and Windows mixed. Up to five activated at a time.
Internet
Needed to activate. After that it checks your key about once a week and keeps working offline.
A free update for everyone who owns Tertiary. Run the new installer over the old one; your key and settings stay.
Runs natively on Apple Silicon and Intel Macs, on macOS 11 (Big Sur) and later, and now comes as an Audio Unit as well as a VST3.
A preset bar at the top of the window with 14 factory presets. Save your own: the VST3, AU and standalone app share them, and your DAW’s preset list shows them too.
A new menu, drawn sharp at 100, 125, 150 and 200%. The scope zooms smoothly, follows tempo and rate changes as you make them, and greys out a bypassed band.
Try it free for as long as you like, and buy a key when you’re sure. The demo and the full version are the same install.
Every control works. Each minute it runs for 50 seconds with the effect on, then bypasses for 10 seconds. A key unlocks the same install.
Mac: Apple Silicon or Intel, macOS 11 or newer. Windows 10 or newer, 64-bit.
What changed in each version, and the previous version’s installers: changelog.
$20
one time
Click Activate at the top of the plugin window, or choose Activate Tertiary from the menu at the top right. Enter your email and key, and click Activate Serial Key. The computer needs to be online for this step.
All of your own computers, Mac and Windows mixed, with up to five activated at a time. To move it, deactivate it on the old computer first. If an old computer died, write in and I’ll free it.
Yes. It needs a connection to activate, then checks your key about once a week when it can. Offline, it keeps working.
Yes, natively, from version 1.1, on macOS 11 or newer. It comes as an AU and a VST3.
Yes, for life. When a new version is out, Tertiary shows a link to it in its window. Download the new installer and run it over the old one. Your key and settings stay.
Once. If you stop using Tertiary, email me and I’ll move the licence to the new owner.
Found a bug? Report it, and I will take a look.
Get an email when Tertiary updates or a new plugin comes out.
News of Tertiary updates and new plugins, a few times a year. You confirm by email first; unsubscribe any time.
This site uses cookies for Google Analytics, for Meta (Facebook and Instagram) to measure our ads, and to note how you found us when you order. The cart works either way. Privacy policy